Trimmer should be held at a comfortable position with the rear handle about hip height. Always wear the shoulder strap when using the brushcutter and adjust to a comfortable operating position. Always refuel outdoors where there are no sparks and flames. While some parts and accessories may be interchangeable, it is important to buy the correct Ryobi weed eater parts for your particular trimmer. Synthetic 2-stroke oil containing a fuel stabilizer is recommended. While many Ryobi weed wacker parts that are available for purchase are new, you can also find used ones for some models for sale on eBay. Mix the fuel thoroughly and also each time before. Grass wraps around shaft housing and bump head. Always stop the engine and remove the spark plug wire before making any adjustments or repairs except for carburetor adjustments.

Connect the latch on the shoulder strap to the strap.

Keep a firm grip with both hands while in operation. Secure long hair so it is above shoulder level to prevent entanglement in any moving parts. NOTE: To quickly release the product from the shoulder strap, sharply pull the quick release tab.ATTACHING THE POWERHEAD TO THE TRIMMER ATTACHMENT (Fig 2f)WARNINGNever attach or adjust any attachment while the powerhead is running. So there is no guarantee provided in case of professional or commercial use.

Remove the line from the spool and rewind. 2c. Remove the bracket from the front handle. Danger of Ricochet. Place the securing bolts through the front handle and securely tighten them into the captive nuts on the. <<

When sending a product to an RYOBI service station, the product should be safely packed without any dangerous contents such as petrol, marked with the senders address, and accompanied by a short description of the fault. Loosen the knob on the coupler of the powerhead. Use only the manufacturers replacement line in the cutting head. Make sure Switch is in the ON or I position. %PDF-1.3 Comment document.getElementById("comment").setAttribute("id","aabc0f91e183e802468ff152e8be9dc6");document.getElementById("afe6277d1c").setAttribute("id","comment"); Save my name, email, and website in this browser for the next time I comment.

If you notice a power loss with your petrol-powered tool, a qualified service technician will need to remove these deposits to restore performance.SPARK ARRESTORIt is recommended to clean or replace the spark arrestor every 25 hours or yearly to ensure the proper performance of your product. Keep the tool well maintained, fasteners tightened and worn parts replaced. Use the combination wrench supplied to loosen all 3 bolts, then remove the grass deflector from the blade. Tri-Arc blade is appropriate for this unit and is suited for cutting pulpy weeds and vines. If these solutions do not solve the problem, contact your authorized service dealer. Push in the button located on the trimmer attachment Align the button with the guide recess on the powerhead coupler and slide the two shafts together. /Frequency 60 Engine starts runs and accelerates but will not idle.

Clean per instruction in Maintenance Section. Here are some of the most common options for trimmer spools, heads, and lines: From helping to improve comfort to adding completely new functions, the right Ryobi trimmer parts and accessories can help you expand the workload you perform with your weed eater. Copyright 1995-2022 eBay Inc. All Rights Reserved.

Please call us at: 1-800-HOME-DEPOT (1-800-466-3337), Please enter in your email address in the following format: you@domain.com. Keep petrol and oil away from the eyes. Continue to push the string through the bump head until the middle section of the string is inside the pump head and the string outside the bump head is evenly divided on each side.

Install more line. Never start or run the engine in a closed or poorly ventilated area; breathing exhaust fumes can kill. Remove the upper flange washer from the gear shaft and retain it for the bump head installation. Shop products from small business brands sold in Amazons store. Push in the button and twist the shafts to remove and separate ends. Rotate the knob on the bump head clockwise to wind the string. Stop the engine and disconnect the spark plug wire. WARNINGInspection after dropping or other impacts: Thoroughly inspect the product and identify any affections or damage with it. The blade protector has clips around the edges to snap over the blade and keep it in, Wear gloves and be cautious when handling the. Maintain a firm grip on both handles while trimming. This guarantee does not apply to: For servicing, the product must be sent or presented to an RYOBI authorized service station listed for each country in the following list of service station addresses. Bump heads automatically release line when they are bumped against the ground during operation; some also have easy cranks for adding line to the spool. Wear eye, hearing and head protection when operating this equipment. 12)For proper performance and long life, keep the air filter screen clean.

Tighten securely. on RYOBI RBC26SESB Petrol Expand-It 2-in-1 Grass Trimmer and Brush Cutter 460mm Instructions, RYOBI RCS36 Cordless Chainsaw 36V Li-Ion Instruction Manual, RYOBI EID11002RV Two Speed Percussion Drill, 1100 W User Manual, http://uksyobitools.eu/header/service-and-supporUservice-agents, RYOBI RBC26SESB Petrol Expand-It 2-in-1 Grass Trimmer and Brush Cutter 460mm, RYOBI RBC52FSB Petrol Brush Cutter with Bike Handle Instruction Manual, Panasonic Moustache Trimmer Instruction Manual, RYOBI RLT26CDS 26cc Petrol Line Trimmer User Manual, BLACK DECKER BEHT201 450mm Hedge Trimmer Instructions, Petrol Expand-It 2-in-1 Grass Trimmer and Brush Cutter 460mm, SUNJOE SPX2598P-MAX-RM 13A Electric Pressure Washer User Manual, Ionvac UtraClean Sanitizing Robo Vac User Manual, Nimble For Good Pbc NBWPSPABLK Apollo Wireless Pad User Manual, KOOWHEEL D4 6000mah Electric Skateboard Instructions, SUNJOE SPX2600-RM Electric Pressure Washer User Manual, ZERFUN G8 Pro Wireless Microphone System User Manual, Airrex Infrared Heater AH-200/300/800 User Manual, 2017 Toyota Camry Hybrid LE Fuse Box Diagrams, 2017 Mitsubishi Lancer 4WD Fuse Box Diagrams, Mitsubishi Lancer Passenger and Engine Fuse Box Diagram, Mira Honesty ERD Bar Valve and Fittings User Manual. /Width 1704 ATTACHING THE GRASS DEFLECTOR TO THE GUARD (Fig. In addition to any statutory rights resulting from the purchase, this product is covered by a guarantee as stated below. Make sure that all items listed in the packing list are included. The cutting plane should be approximately parallel to the ground surface. Make sure all guards, straps, deflectors, and handles are properly and securely attached to avoid the risk of personal injury. *T.>8fG z3u5 ;#:DbG,e!i_N^2:BW*@| Du"k,v-k?bZq%U@ "zJ(W*PZDtIGuJ:KG"?Hu4KI** PK%JDV"?GTkEXCDzZPD}dA3EHPbDdtG1ft ,pdqBQPB(b>>Gd#"8cI%FytXc2:Dty-CE4dFqV0J-M% GGDqZ(u6G":BB 8) WARNINGExtreme care must be taken when using blades to ensure safe operation. In the event that an unexpected object or woody stock is encountered, this could minimize the blade thrust reaction. After viewing product detail pages, look here to find an easy way to navigate back to pages you are interested in. A repair/replacement under this guarantee is free of charge. Look for parts that don't experience heavy wear during use. Spool retainers, springs, and clips ensure proper operation of your trimmer head. The guarantee is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages. /DecodeParms <>>> Maintain proper. Contact servicing dealer if the problem persists. 5). Prior to replacing the fuel cap, clean and inspect the gasket. Cut tall grass from the top down. Inspect the tool carefully to make sure no breakage or damage occurred during shipping. Contact a servicing dealer.

Mix and store fuel in a container approved for fuel. Install the cupped washer with the raised center away from the blade. 4)WARNINGNever start or run the engine inside a closed orpoorly ventilated area; breathing exhaust fumescan kill. Kickback can occur when using the brush cutter. 4 0 obj Loosen the fuel cap slowly to release pressure and to keep fuel from escaping around the cap. Need Help? Gas tank assemblies help you get fuel to your trimmer motor. Use an exact replacement and replace the spark plug annually. Install the cutting line. The cutting attachment must not rotate in idle mode. Place the upper flange washer over the gear shaft with the hollow side towards the blade guard. Idle speed screw on carburetor requires adjustment. When cutting, make sure the cutter head is at a slight angle as shown while still approximately parallel to the ground surface. It becomesvery hot after you stop the engine. Do not mix quantities larger than usable in a 30 day period. If the primer bulb fills, the engine may be flooded, proceed to the next item. It is essential that you read the instructions in, RLT26CDS STRING TRIMMER USERS MANUAL Important! Injury caused by vibration. The TRI-ARC blade is suited for cutting pulpy weeds and vines only. Align the slot in the upper flange washer with the hole in the gear head.

/Angle 45 Adjust the shoulder straphanger to a balanced position where the blade or cutter attachment will suspend between 100 mm to 300 mm above the ground surface.

stream Failure to stop the engine may cause serious personal injury. A coasting blade can cause injury while it continues to spin after the engine has been stopped or the throttle trigger has been released.

Do not use any type of pre-mixed petrol/oil from fuel service stations, this includes the pre-mixed petrol/oil intended for use in mopeds, motorcycles, etc. NOTE: Always remove the blade protector before using the unit. /Height 2200

Use fresh fuel and the correct 2-stroke oil mix.

2e)WARNINGTo reduce the risk of serious personal injury, always stop the engine and remove the spark plug wire before making any adjustments such as changing cutting heads.TO REMOVE THE PUMP HEAD, NOTE: Store the bump head parts together for later use.TO INSTALL THE BLADE, CONVERTING BRUSHCUTTER TO STRING TRIMMER TO REMOVE THE BLADE, NOTE: Store the brush cutter parts together for later use.TO INSTALL THE BUMP HEAD (Fig. Rotate the trimmer attachment shaft until the button locks into the positioning hole.

Failure to do so can cause serious injury. Indicates danger, warning, or caution. 21 product ratings - Ryobi & Homelite Grass Shield/Guard for RY253SS Straight Shaft Trimmer 308473005, 240 product ratings - For Ryobi 12-Pack Replace Spool One+ String trimmer Line 18V 24V 40V Weed Eater, 12 product ratings - Ryobi Reel Easy Bump Head For RY4CCS RY252CS Curved Shaft Arborless (AC04156), 56 product ratings - Ryobi OEM 313318001 String Trimmer Trimmer Head Assembly P2009 RY15523A, 2 product ratings - Ryobi OEM Guard For P2008 Cordless18v13" String Trimmer/Edger P2008VNM, 21 product ratings - Ryobi Reel Easy Bump Head For RY4CSS RY253SS Straight Shaft 311759014 (AC04156), 10 product ratings - OEM Homelite/Ryobi/Toro Trimmer Clutch 307091001 51954 RY251PH RY252CS RY253SS, 3 product ratings - Ryobi Arborless Upper Trimmer Head Housing P2009 RY155230 RY252CS RY253SS, 10 product ratings - OEM Ryobi RY251PH RY252CS RY253SS Air Filter Box Base w/ Choke Lever 307191001, 24 product ratings - Ryobi Speed Winder Crank Reel Easy Trimmer Head RY251PH RY252CS RY253SS P2009, 28 product ratings - OEM Ryobi Air Filter Cover 308649003 for RY251PH RY252CS RY253SS RY254BC, 8 product ratings - Ryobi Expand-It 10" Pruner Pole Saw Attachment Factory Reconditioned, 23 product ratings - OEM Ryobi Ignition Coil 291337001, RY251PH RY252CS RY253SS RY254BC, 2 product ratings - OEM Ryobi 312630001 Attachment Coupler Pipe/Tube Clamp RY251PH RY252CS RY253SS, 30 product ratings - Genuine Ryobi RY40002 Throttle Trigger 526984001, 3 product ratings - OEM Ryobi Front Handle 526764002 for RY251PH, RY252CS, RY253SS, 8 product ratings - Throttle Cable Ryobi Trimmer RY251PH RY252CS RY253SS 307318001, Other Outdoor Power Equipment Accessories. Install the front handle onto the upper shaft. engine performance, Noise emission (in accordance with ISO 22868), A-weight emission sound pressure level at the operators position (line trimmer/brushcutter), The engine starts but will not idle long enough to engage the throttle, The engine does not stop when the switch is turned off, The electrical connection is loose/ unplugged.

Ryobi Electric Trimmer/Edger/Blower Operator's Manual, Ryobi Gas Trimmer Operator's Manual Model, Ryobi Electric Trimmer/Edger Operator's Manual, Ryobi Gas Trimmer/Edger Operator's Manual, 325HDA55X-series 325HE3X-series 325HE4X-series Operators manual, Ryobi Gas Trimmer / Edger Operator's Manual, Ryobi Gas Trimmer/Brush Cutter Operator's Manual, Ryobi 2-Cycle Gas Trimmer Operator's Manual, Ryobi Flail Head Trimmer Operator's Manual, Ryobi Gas Trimmer/Edger/Blower Operator's Manual, Ryobi 2-Cycle Gas Trimmer/Brush Cutter Operator's Manual, Ryobi 4-Cycle Gas Trimmer Operator's Manual, Ryobi String Trimmer And Brush Cutter Operator's Manual. If performance improves when the fuel cap is loosened, the check valve may be faulty or the filter clogged. In some countries, delivery charges or postage will have to be paid by the sender. Loosen the spark plug by turning it in a counterclockwise direction using a combination wrench. There seems to be a problem serving the request at this time, One stop shop for all things from your favorite brand, Ryobi Brush Cutter Attachment String Trimmer Parts.

This is a 50:1 ratio. Temperature can affect engine idle time and rpm. Using the 16 mm wrench supplied, turn the drive connector clockwise to remove it. Brushcutter should be held at a comfortable position with the trigger handle about hip height. Clean air filter. Never use the brushcutter with the blade located 76 cm or more above the ground level. /HalftoneName (Default) To stop the engine:Toggle the switch to the o (off) position.OPERATING THE TRIMMER (Fig. Discover more about the small businesses partnering with Amazon and Amazons commitment to empowering them. The contents of the line trimmer head are spring-loaded, so keep your other hand over the line trimmer head cover while depressing the latches. Wear heavy long trousers, boots, and gloves. >> Pre-mix unleaded petrol and 2-stroke engine oil in a clean container approved for petrol. Do not use it for any other purpose. Cut one piece of string approximately 6 m in length, Rotate the knob on the bump head until the line on the knob aligns with the arrows on top of the bump. WARNINGUse only the original manufacturers replacement parts, accessories, and attachments. Maximum engine performance (in accordance with ISO 8893), The maximum rotational frequency of the spindle, Engine speed (rotational frequency) at recommended max.

Replace pump head is cracked, chipped, or damaged in any way. The warranty is not valid if the product has been misused, used contrary to the instruction manual, or is incorrectly connected.

/Length 33429 ? G["~#'O;JQ\gU%TS"iOPr#8"?!tz0B.! ryobi x430 diagram parts crank cycle tools head power Remove currently installed line trimmer head.

Use synthetic 2-stroke oil only. In tall grass cut from the top down to ensure the moving. You can find everything from driveshafts and ignition parts to grass clipping shields and spool heads for sale. << Remove the old spark plug and replace it with a new one. Only use fresh fuel mixed with recommended oil. Inspect the unit before each use for loose fasteners, fuel leaks, etc. Do not attempt to touch or stop the blade when it is rotating. Turn the blade nut clockwise to remove. Hold the front portion of the rubber protect boot and pull it away from the housing. The following hazards may arise in use andthe operator should pay special attention to avoid thefollowing: Please refer to Fig. If irritation is still present, see a doctor immediately. Ergonomic handles can help improve comfort while operating a Ryobi string trimmer. Do not smoke.STARTING AND STOPPING (Fig. Clear the work area before each use. 2UNPACKINGThis product requires assembly. You may make adjustments and repairs described For other repairs, have the trimmer serviced by an authorized service agent. Top subscription boxes right to your door, 1996-2022, Amazon.com, Inc. or its affiliates. Keep all bystanders, especially children and pets, at least 15 m from the operating area.

/OP false The spark plug may be damaged, remove it and check for dirt and cracks. Entire engines may help you bring new life to a non-functioning weed eater. Do not use any other blade. Never add fuel to a machine with a running or hot engine.Move at least 9 m from the refueling site beforestarting the engine. Remove the line trimmer headcover, bump knob, and line spool and set aside. This is more likely to occur in areas where it is difficult to see the material being cut. The engine requires approximately three minutes to warm up. 2000-2022 Home Depot. Replace the air filter cover by inserting the tabs on the bottom of the cover into the slots on the air filter base; push the cover-up until it latches securely in place. Do not operate the brushcutter unless the blade guard is firmly secured in place and in good condition.

2a). Always stop the engine and remove the spark plug wire before attempting to remove any obstruction caught or jammed in the blade or before removing and installing the blade. Hold the trimmer with the right hand on the rear handle and the left hand on the front handle. 1 0 obj This reaction can be violent enough to cause the operator to lose control of the unit. Heads with serrated blades cut through thick weeds. Engine starts but will only run at high speed at half choke.

Never operate the unit without the grass deflector in place and in good condition. Replace any blade that has been damaged. Attach the grass deflector to the blade guard and align the 3 screws on the grass deflector to the screw holes on the blade guard. Exercise extreme caution when using the blade with this unit. Make sure all guards, straps, deflectors, and handles are properly and securely attached. Use heavy gloves while installing or removing blades. This engine is certified to operate on unleaded petrol intended for automotive use with an octane rating of 91 ([R + M] / 2) or higher. WARNINGIf any parts are damaged or missing, do not operate this tool until the parts are replaced.Failure to heed this warning could result in serious personal injury.WARNINGDo not attempt to modify this product or create accessories not recommended for use with this product. /HT /Default *! % /Type /XObject Stop the engine and allow it to cool before refueling, performing adjustments or maintenance, or storage. mend break Without fuel, cutting attachment and harness Without fuel, with bump head. Adjust the shoulder strap to position the brushcutter at a comfortable operating position and to assure that the shoulder strap will reduce the risk of operator contact with the blade. Remove the upper flange washer from the gear shaft and retain it for blade installation. Do not operate this unit when you are tired, ill, or under the influence of alcohol, drugs, or medication.

Rotate the bump knob on the line trimmer head until the line on the center of the bump knob aligns with arrows on top of the line trimmer head. Keep all parts of your body away from any moving part.

All customers get FREE Shipping on orders over $25 shipped by Amazon. /Name /Im1 Fuel over 30 days old may prevent the unit from starting.

Rotate the knob on the line trimmer head to wind the If using a straight shaft attachment, rotate the knob clockwise. Install the upper flange washer onto the gear shaft with the hollow side towards the gear head. Install the blade, Place the combination wrench through the slot in the upper flange washer and the hole in the gear head. ryobi trimmer curved 25cc ry252cs capable wacker crank edger toro jet brushless 4cc lithium 20v dewalt trimmers winnola Spark arrestors may be in different locations depending on the model purchased. Continue to push the line through the line trimmer head until the middle section of the line is inside the line trimmer head and the line outside the line trimmer head is evenly divided on each side. It is essential that you read the instructions in this manual before assembling, maintaining, and operating this machine.Subject to technical modifications.

If petrol or oil comes in contact with the eyes, wash them immediately with clean water. Turn the spool retainer bolt clockwise to remove. A clogged fuel filter will cause poor engine performance. Techtronic Industries GmbHMax-Eyth-Strae 10, 71364 Winnenden, GermanyHerewith we declare that the productString Trimmer / BrushcutterBrand: RyobiModel number: RBC26SESBSerial number range: 44427501000001 44427501999999is in conformity with the following European Directives and harmonized standards2006/42/EC, 2014/30/EU, 2000/14/EC, 2005/88/EC, 97/68/EC, 2002/88/EC, 2004/26/EC, 2010/26/EU, EN ISO 11806-1:2011,EN ISO 14982:2009, EN ISO 3744:2010Measured sound power level: 107.5 dB(A)Guaranteed sound power level: 109 dB(A)Conformity assessment method to Annex V Directive 2000/14/EC amended by 2005/88/EC.Floyd Jeffrey Nesom (BSME)Senior Director of EngineeringWinnenden, April 30, 2016Authorized to compile the technical file:Alexander Krug, Managing DirectorTechtronic Industries GmbHMax-Eyth-Strae 10, 71364 Winnenden, Germany961478052-02, RYOBI RBC52FSB Petrol Brush Cutter with Bike Handle Important! If this requirement is not satisfied, the clutch has to be adjusted or the machine needs urgent maintenance by a qualified technician. Remove the air filter cover by pushing down on the latch with your thumb while gently pulling on the cover. Always operate trimmer at full throttle.

/SpotFunction /Round View cart for details. Here are some of the more common replacement parts you may need: There are many types of replacement heads available for Ryobi string trimmers. 5), ADVANCING THE LINE (Fig. Starter rope now harder to pull than when it was new. Set the choke lever to. Always make sure the blade is installed correctly and securely fastened before each use. This product is powered by a 2-stroke engine and requires pre-mixing petrol and 2-stroke oil. The guarantee covers all defects of the product during the warranty period due to defaults in workmanship or material at the purchase date. Install line as described in the next section of this, Cut one piece of line approximately 6.0 meters in. Use of this site is subject to certain Terms Of Use. The guarantee period is 24 months for consumers and commences on the date when the product was pur This date has to be documented by an invoice or other proof of purchase. Blade thrust may occur without warning if the blade snags, stalls, or binds. Store it in a well-ventilated place that is inaccessible to Keep away from corrosive agents such as garden chemicals and de-icing salts. Rotational direction and maximum speed of the shaft for the cutting attachment.. Keep reading to hear answers to common questions you may have when shopping for Ryobi weed eater parts and accessories on eBay. /Subtype /Image Do not use any other cutting attachment. Home RYOBI RYOBI RBC26SESB Petrol Expand-It 2-in-1 Grass Trimmer and Brush Cutter 460mm Instructions, RBC26SESBSTRING TRIMMER/BRUSHCUTTERORIGINAL INSTRUCTIONS. Your manual contains special messages to bring attention to potential safety concerns as well as operating and servicing information. The trimmer attachment connects to the powerhead by means of a coupler device. Refer to Line Replacement earlier in this manual. Insert one end of the string into the eyelet located on the side of the pump head and push until the string comes out through the eyelet on the other side. engine performance, Specific fuel consumption (in accordance with ISO 8893) at max. If the grass becomes wrapped around the bump head, stop the engine, disconnect the spark plug wire, and remove the grass. Failure to comply may result in accidents involving fire, electric shock, or serious personal injury. Place the combination wrench through the slot in the upper flange washer and the hole in the gear head. Install the hex bolt to secure the line trimmer head to the drive shaft. Replace the line trimmer headcover, aligning latches with openings in the line trimmer head. <<

=WZB Fmr$TKC2BM%#":TG!#zwA/Cei^) $)PQd(A%P)GUG2 W]*TDtGKJxDa#I/CBb)$#m!HTP&u_W6BI=! NOTE: Only use the bump knob to tighten the bolt. /BitsPerComponent 1 Remove the spark plug, turn unit so the spark plug hole is aimed at the ground. promotion, range of tools), a possibility to extend the warranty period over the period described above using the registration on the. Products shown as available are normally stocked but inventory levels cannot be guaranteed, For screen reader problems with this website, please call 1-800-430-3376 or text 38698 (standard carrier rates apply to texts), Get the most out of your outdoor power tool with string trimmers, 25 cc 2-Stroke Attachment Capable Full Crank Straight Gas Shaft String Trimmer, 25 cc 2-Stroke Attachment Capable Full Crank Curved Shaft Gas String Trimmer. Please read all the information carefully to ensure satisfaction and safe use. It means attention!!! Place the combination wrench through the slot in the upper flange washer and the gear head. Center the blade on the upper flange, making sure the blade sits flat. Abide by all ISO and local regulations for the safe storage and handling of fuel. Always place the blade protector on the blade when the unit is not in use. The product is designed and dedicated to consumer and private use only. Do not inhale fuel vapors. Do not pull the starter grip more than 6 times.

Do not let petrol or oil come in contact with your skin. In some countries, your local RYOBI dealer undertakes to send the product to the RYOBI service organization. Exercise extreme caution when using the blade with this unit. Replace any damaged parts before use. Use only the manufacturers replacement TRI-ARC blade intended for use on this brushcutter. Exchanged parts or tools become our property. Do not allow children or untrained individuals to use this unit. Read the safety information for safe operation using the blade, refer to Specific Safety Rules for Brushcutter and Blade earlier in this manual. Failure to stop the engine may cause serious personal injury.WARNINGTo avoid serious injury, ensure that all guards and covers are correctly fitted and all fixings and fasteners are tight before use. Use fresh fuel and the correct synthetic 2-stroke oil mix. Remove the upper bump head from the drive.

Refer to Cleaning the Air Filter earlier in this manual. Whether you are looking to repair a broken weed eater, to perform routine maintenance, or to add accessories to your trimmer, replacement parts for Ryobi weed eaters are available to help. I can not get RY28040 - replaced spark module, but after replaci Copyright 2020 Inmar-OIQ, LLC All Rights Reserved, Ryobi Trimmer 225L, 225LD, 227L, 227LD, 232L, 240L, Ryobi Trimmer 227 L, 227 LD, 232 L, 240 L.

The product should not be used to cut or trim hedges, bushes, or other vegetation where the cutting plane is not parallel to the ground surface.WARNINGTo reduce the risk of injury, the user must read and understand the operators manual.WARNINGDo not attempt to operate this trimmer/brushcutter until you have read thoroughly and understood completely all instructions, safety rules, etc contained in this manual. Set the choke lever to Run choke position. Tighten by using the hex-shaped opening on the inside of the bump knob.

Position yourself so that you will not be drawn off balance by the kick-back reaction of the cutting blade. Hold the brushcutter with the right hand on the rear handle and the left hand on the front handle. After the engine stops, keep rotating the blade in heavy grass or pulpy weeds until it stops.

Do not use automotive oil or 2-stroke outboard oil. Maintain your grip and balance on both feet. Please study them and learn their meaning.Proper interpretation of these symbols will allow you to operate the tool better and more safely. Always use the right tool for the job, use designated handles, and restrict working time and exposure. It is essential that you read the instructions in this manual before. Symptoms may include tingling, numbness, and blanching of the fingers, usually apparent upon exposure to cold.