"longDescription": "This industrial-mobile Yuken Style 5 Hydraulic Directional Control Valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. Comes standard with indicating signal lights, manual override, bolt kit and electrical junction box." "description": [{ Minimum purchase required. "fullImage": "/images/product/114x114/702/70298_114x114.jpg", The VSD*M and VPD*M pilot operated directional control valves are available with either electric solenoid or hydraulic actuation of the main spool. port) and 68619 (3/4in.
Realize high-pressure large-flow-rate control at 35 MPa {350 kgf/cm2} and 700 L/min. "longDescription": "This industrial-mobile Yuken Spool-Style 2 Hydraulic Directional Control Valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. "catalogEntryIdentifier": {
"uniqueID": "200737719", Indicating signal lights, manual override and electrical junction box are standard. With pressures to 5000 PSI continues duty and many function flow direction options, we have the correct valves for your application. 19,2 MM, HEIGHT 55 MM, 36 WATT271-0521, C65D1-12VDC-DIN43650 (VS92,VS100,105,281,285,300,305,312), CORE DIA. As a single-solenoid valve, it will remain in its home position until shifted electrically, returning to home when the power is removed.
This will be available when you log in on the Members Only page.
"description": [{ "uniqueID": "200737670", "fullImage": "/images/product/114x114/736/73682_114x114.jpg", According to current safety standards, a Risk Assessment should be performed as a part of the component selection. "offerPrice": ", {"catalogEntry": {
Should you require a brand-new hydraulic valve, or replacements, make sure you see the huge range at Flowfit today. As a 2-position, 4-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder. The valve mounts on Northern Tool Subplates 68306 (1/4in.
These reviews often provide answers to lingering questions along with other insight valuable to purchasing a unit right for you.
}], spool directional d100 hydraulics CETOP stands for Comit Europen des Transmissions Olohydrauliques et Pneumatiques. electro 4weh rexroth directional
Realize high-pressure large-flow-rate control at 35 MPa {350 kgf/cm2} and 1100 L/min. } "catalogEntryIdentifier": { Its molded coils are moisture and dirt resistant. As well as our own Flowfit branded products, we also stock valves from leading Italian manufacturer Galtech. Its molded coils are moisture and dirt resistant.
Its molded coils are moisture and dirt resistant. "partNumber": "73710" As a 3-position, 4-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder. It ensures that any valves from any manufacturer, providing the CETOP pattern is the same is compatible with each other. "offerPrice": ", {"catalogEntry": { } Get information about our products and services provided, Copyright 2016; HYDROMA, Ltd.; all rights reserved, PROPORTIONAL CARTRIDGE VALVE - SOLENOID KIT, DIRECTIONAL CONTROL VALVE WITH PRIORITY VERTICAL ELEMENT, DIVERTER VALVE 3/2 - MECHANICAL CAM CONTROL, pilot operated NG10 , NG16 , NG25, NG32 (CETOP 05,07,08,10), series DS 302, 307, 507 - subplate mounting, series DS 302, 307, 507 - in-line mounting, filtering elements of world manufacturers, male/female stud adaptors packing ring (RED), stud standpipe adaptors packing ring/O-ring seal (EGESD), angular rottary fitting with O-ring seal (EWSD), rottary fitting a L with O-ring seal (ELSD), rottary fitting a tees with O-ring seal (ETSD), reduced male nipple straight coupling BSPP (GHB), STOPFLEX retention system for pressure hoses. Indicating signal lights, manual override and electrical junction box are standard. "uniqueID": "200737672",
No hydraulic locking occurs even during long periods of pressurized operation. "shortDescription": "Yuken Spool-Style 3 Hydraulic Directional Control Valve – 26 GPM, 5080 PSI, 3-Position, 12 Volt DC Solenoid, Model# DSG-01-3C3-D12-7090", "externalIdentifier": {
"externalIdentifier": { "longDescription": "This industrial-mobile GRH Nickel-Plated Hydraulic Directional Control Valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. "longDescription": "This industrial-mobile Yuken Spool-Style 2 Hydraulic Directional Control Valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. Adoption of the shockless spool enables smooth reversal and stopping of the load. "fullImage": "/images/product/114x114/683/68304_114x114.jpg", port), 203341 (1/2in. As a 3-position, 4-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder.
The valve mounts on Northern Tool Subplates 203331 (3/8in. "catalogEntryIdentifier": { sales@flowfitonline.com, Mon to Thu 8:30 am to 5 pm, Friday 8 am to 4 pm.
JP valve enables switching of the direction of flow of the fluid by operating the spool with the hydraulic pilot valve. "partNumber": "68301" These devices are only one part of an overall system and are intended to be combined with other safety rated components to provide energy isolation and/or energy dissipation. Galtech is one of the most well renowned brands in the world of hydraulics. "catalogEntryIdentifier": { "description": [{
These cookies are used to collect information about how you interact with our website and allow us to remember you. directional vickers eaton dg5v 350bar spool directional control valves valve directional enerpac manual way hydraulic position mounted pump vm tandem center solenoid window close metrohydraulic equipment "fullImage": "/images/product/114x114/683/68305_114x114.jpg", }],
port), sold separately." cleared payment - opens in a new window or tab, - for PayPal Credit, opens in a new window or tab, Learn more about eBay global shipping program, - eBay Return policy - opens in a new tab or window, - eBay Money Back Guarantee - opens in a new tab or window. "shortDescription": "Yuken Spool-Style 2 Hydraulic Directional Control Valve – 26 GPM, 4570 PSI, 3-Position, 120V AC Solenoid, Model# DSG-03-3C2-A120-5090", "uniqueID": "200737666", The structure has a high level of pressure balance, which suppresses the variation in the force required to operate the handle according to the pressure change. RS Components offer a range of high-quality directional control valves from leading brands including Parker and Bosch Rexroth. port)." "partNumber": "73682" "externalIdentifier": {
Electro-hydraulic directional control valve is the combination of the electrical operated directional control valve and the hydraulic operated directional control valve. The valve mounts on Northern Tool Subplates 68618 (1/2in.
acting d100 hydraulics }, "description": [{ },
This valve mounts on subplates also found at Northern Tool. Galtech GMV15 & Q15 Monoblock Control Valves, Galtech Q25 & Q45 Monoblock Control Valves, Galtech Q75 & Q95 Monoblock Control Valves, Double Acting Cylinder With Fixed Pin Holes, Double Acting Hydraulic Cylinder With No Ends, Double Acting Cylinder With Spherical Ends, Bucher UP100 DC Pressure and Tank Circuit, Bucher UP100 AC Pressure and Tank Circuit, Male x Fixed Female and Fixed Female/Female, Swepts, Push-ins, Hose-Tails and Ferrules, FLOWFIT HYDRAULIC WELDLESS STEEL RESERVOIRS WITH PRE-DRILLED FILLER BR, Visual Level Indicators With Float System. "description": [{ "catalogEntryIdentifier": { "externalIdentifier": { Also known as a DCV (Directional Control Valve) they can have a number of actuation methods including buttons, levers or solenoids. The valve mounts on Northern Tool Subplates (sold separately)." "shortDescription": "GRH Nickel-Plated Hydraulic Directional Control Valve – 16.5 GPM, 4560 PSI, 2-Position, Spool Style 2D2, 12V Solenoid, Model# GRH-01-2D2-D12-D-NP-33", As a single solenoid valve, it will remain in its home position (tandem center) until shifted electrically, returning to home when the power is removed. "partNumber": "68298" "partNumber": "68297" DM04 valve enables switching of the direction of flow of the fluid by operating the spool with the manual operation lever.
Something went wrong. }, }], hydraulic spool electronic directional valve gpm acting control double valve control hydraulic directional direction operated electrical valves based
eaton vickers "offerPrice": ", {"catalogEntry": { As spring-centered valve, it will remain in its home all-ports blocked position until shifted electrically to one of 2 positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. } The spool can be actuated in different ways including levers or electrical solenoids. } Compact directional control valves using a rotary spool available in two models, one dedicated to manual operation and the other with a dog for cam operation (manual operation also possible). Indicating signal lights, manual override and electrical junction box are standard. Twitter, T: "partNumber": "68299"
The spools allow the hydraulic fluid to flow through open ports depending on the position of the spool. Flowfit has a range of products created specifically for us. "fullImage": "/images/product/114x114/683/68301_114x114.jpg", "shortDescription": "Yuken Spool-Style 2 Hydraulic Directional Control Valve – 26 GPM, 5080 PSI, 3-Position, 12 Volt DC Solenoid, Model# DSG-01-3C2-D12-7090",
Should you require any technical data, you can find this for free on the individual product pages. "description": [{ DD2 is a 2-position, 2-way valve which enables switching of the fluid passage in a hydraulic pilot circuit or interlocking circuit using cam operation. "externalIdentifier": {
port)."
The Duplomatic Group designs and manufactures technology solutions for motion control in multiple sectors. }], spool directional hydraulics summit d100
The valve mounts on Northern Tool Subplates 68306 (1/4in. Skol Marketing. Hydraulic directional control valves are characterized by a standard numbering system consisting of two numbers. As you shop, youll be happy to find some of the most reliable names in the solenoid powered valve business, including Yuken and GRH. Here, you will find a download link for technical specs in a pdf format, as well as different options regarding flow, pressure and so on. port), sold separately." Electro-hydraulic directional control valve, Explosion isolation pressure control valve, Explosion isolation directional control valve, 1.0Spring-Return three-way valve two-way valve, 1.2Spring-Return three-way valve two-way valve, 1.3Spring-Return three-way valve two-way valve, The maximum allowable cleanliness of the oil should be according to 9th degree of Standard NAS1638.lt is suggested that the minimum filter rating should be 1075.
As a spring-centered valve, it will remain in its home "all-ports blocked" position until shifted electrically to 1 of 2 positions to either extend or retract a cylinder, returning to home when the power is removed.
Indicating signal lights, manual override and electrical junction box are standard.
"longDescription": "This industrial-mobile Yuken Style 5 Hydraulic Directional Control Valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. }, } "catalogEntryIdentifier": { "fullImage": "/images/product/114x114/682/68298_114x114.jpg", CopyRight Ningbo Hoyea Machinery Manufacture Co.,Ltd. The lever valve also is available in a 3 position detent model. acting As you browse the hydraulic solenoid powered valves here, be sure to check out any customer reviews on items of interest to you. As a 3-position, 4-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a single-solenoid valve, it will remain in its home position (tandem center) until shifted electrically, returning to home when the power is removed. As a single solenoid valve, it will remain in its home position (tandem center) until shifted electrically, returning to home when the power is removed.
"offerPrice": ", {"catalogEntry": { 2.The medium used in the hydraulic system must be filtered, its accuracy is at least 20 m m. 3.Screw should be according to the parameters in catalogue. }], We can also deliverany hydraulic control valve to anywhere in the world. It may control the movement of the power elements, or control the direction of the flowing oil. As a single-power solenoid valve, it will remain in its home position (tandem center) until shifted electrically, returning to home when the power is removed. Raspberry Pi, Arduino & Development Tools, Engineering Materials & Industrial Hardware. "fullImage": "/images/product/114x114/703/70304_114x114.jpg", Copyright 1995-2022 eBay Inc. All Rights Reserved. hydraulic acting directional hydraulics d100 "fullImage": "/images/product/114x114/698/69839_114x114.jpg", valve hydraulic directional control d03 cetop volt closed center dsg As a 3-position, 4-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a 3-position, 4-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder. "externalIdentifier": {
Its molded coils are moisture and dirt resistant.
Low current requirement for the valve allow it to be driven directly from a programmable sequence controller. "shortDescription": "Yuken Spool-Style 5 Hydraulic Directional Control Valve – 11 GPM, 5080 PSI, 3-Position, 120 Volt AC Solenoid, Model# DSG-01-3C60-A120-7090", "fullImage": "/images/product/114x114/703/70306_114x114.jpg",
"shortDescription": "Yuken Spool-Style 5 Hydraulic Directional Control Valve – 31 GPM, 4570 PSI, 3-Position, 12V DC Solenoid, Model# DSG-03-3C60-D12-5090", A monoblock valve is required for numerous pumps, motors and more mechanical pieces of hydraulic equipment. The handle can be operated easily even at a high pressure. Indicating signal lights, manual override and electrical junction box are standard. The valves are available in both 2 or 3 position and various spool flow patterns.
One of the bestselling units here is a 5-spool hydraulic directional control valve with 31 GPM, 4750 PSI, 3-position, 4-way directional control and 120V AC power solenoid. As a 3-position, 4-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder. 1 .When installing the product, considering horizontal position firstly. } port) and 68617 (3/8in. These valves are one of the most essential parts of a hydraulic system.They allow the fluid within a system to move into different paths.
"description": [{ Another favorite here is a 5-spool hydraulic directional control valve with 11 GPM, 5080 PSI, 3 positions, 4 directions and a 12 Volt AC power solenoid. 250mm (W62) (ZC-M10-250) FOR D2,D10,D3,D3M,D9,TR55,M50430504019, B24AJ, 24V, AMP Junior, 40 bar, FOR EX38430093101, C36D1-12VDC-DIN43650 (VS70,VS120,ED1), CORE DIA. Pioneering Fluorine Technology Providing Solutions for Life, Utilizing IPM motor and inverter technology for greater energy savings. port)." "shortDescription": "Yuken Spool-Style 5 Hydraulic Directional Control Valve – 13 GPM, 5080 PSI, 3-Position, 12 Volt DC Solenoid, Model# DSG-01-3C60-D12-7090", Realize high-pressure large-flow-rate control at 35 MPa {350 kgf/cm2} and 300 L/min. Installation, Trouble-Shooting, Service Parts / Kits and Maintenance Manuals, Phone: (952) 895-6400 "uniqueID": "200737660",
directional valves spool hydraulics port), sold separately." "offerPrice": ", {"catalogEntry": {
Electro-hydraulic directional control valve and hydraulic operated directional control valve are used mostly in hydraulic systems when electrical operated directional control valve can not afford the flow. "partNumber": "68304" As spring-centered valve, it will remain in its home all-ports blocked position until shifted electrically to one of 2 positions to either extend or retract a cylinder, returning to home when the power is removed. Simply click on the link below to be taken to that valves own page. They are compliant with ATEX, IECEx and INMETRO, UL, CSA requirements and are suitable for use in potentially explosive atmospheres, for surface plants or mines. Its molded coils are moisture and dirt resistant. "longDescription": "This industrial-mobile Yuken Spool-Style 3 Hydraulic Directional Control Valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. "catalogEntryIdentifier": { All versions are available in 2 position spring offset, 2 position detent, 2 position spring centered and 3 position spring centered versions. Its molded coils are moisture and dirt resistant. This unit is commonly used to extend and retract a double-acting hydraulic cylinder. },
"uniqueID": "200737712",
As a 3-position, 4-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder.
"externalIdentifier": {
The highly reliable KSOG02 adopted as the pilot valve ensures long service life and stable operation. As a spring-centered valve, it will remain in its home "all-ports blocked" position until shifted electrically to 1 of 2 positions to either extend or retract a cylinder, returning to home when the power is removed.
"shortDescription": "Yuken Spool-Style 2 Hydraulic Directional Control Valve – 31 GPM, 4570 PSI, 3-Position, 12V DC Solenoid, Model# DSG-03-3C2-D12-5090", As a single-solenoid valve, it will remain in its home position until shifted electrically, returning to home when the power is removed. Northern Tool carries a dependable line of solenoid-powered valves for GPM, max PSI and directional control for any hydraulic cylinder. port), 203341 (1/2in. This solenoid powered valve features IP65-equivalent high dust and waterproof protection and is CE certified for installation. Most directional control valves use spools that slide or rotate between the internal passages in the valve. Comes standard with indicating signal lights, manual override, bolt kit and electrical junction box." "longDescription": "This industrial-mobile Yuken Style 2 Hydraulic Directional Control Valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. "catalogEntryIdentifier": { port)."
Electro-hydraulic directional control valve is a control valve which can use the pressure of the hydraulic circuit to pull the spool and change the hydraulic oil direction. The valve mounts on Northern Tool Subplates 203331 (3/8in. Using these valves in combination with a pressure compensation valve (MUV, MDM) achieves flow rate characteristics with pressure compensation according to the adjustment made with the flow rate adjusting screw. The valve mounts on Northern Tool Subplates 68306 (1/4in. Its molded coils are moisture and dirt resistant. "longDescription": "This industrial-mobile Yuken Spool-Style 5 Hydraulic Directional Control Valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting.
Continental Hydraulics manufactures NFPA D03 to D10 size manifold mounted Directional Control Valves.
As a 3-position, 4-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder. "externalIdentifier": { As a 3-position, 4-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. "offerPrice": ", {"catalogEntry": { "partNumber": "70298" Its molded coils are moisture and dirt resistant. "description": [{ Traditional solenoid - powerful and durable, Position Monitored Solenoid Operated Valves and Kits, Explosion Proof - Hazardous Location Valves, Pneumatic - Hydraulic - Manually Operated, This website stores cookies on your computer. Slice valves operate using a sliding gate to slice through water flow. "externalIdentifier": { "partNumber": "70305" Continental Hydraulics offers directional control valves with air pilot actuation, hydraulic pilot actuation and lever actuation. "shortDescription": "Yuken Spool-Style 1 Hydraulic Directional Control Valve – 21 GPM, 5080 PSI, 2-Position, 12 Volt DC Solenoid, Model# DSG-01-2B2-D12-7090",
"shortDescription": "Yuken Spool-Style 2 Hydraulic Directional Control Valve – 26 GPM, 5080 PSI, 3-Position, 120 Volt AC Spring-Centered, Model# DSG-01-3C2-A120-7090", Comes standard with indicating signal lights, manual override, bolt kit and electrical junction box."
"offerPrice": ", {"catalogEntry": { "uniqueID": "200737717", } "fullImage": "/images/product/114x114/682/68299_114x114.jpg", "longDescription": "This industrial-mobile GRH Nickel-Plated Hydraulic Directional Control Valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. "uniqueID": "200737665", hydraulic electric control valve spool acting rocker gpm switch double Enables construction of a wide variety of circuits in combination with 02 size stack valves. Solenoid / Soft-Shift / Hydraulic / Pneumatic / Manual Lever / Position Sensors. As a double-solenoid valve, it will remain in its home position (ports A&B to tank) until shifted electrically, returning to home when the power is removed. It operates internationally with three brands: Duplomatic for industrial applications, Hydreco for mobile applications and Continental Hydraulics for industrial applications in North America. "offerPrice": ", {"catalogEntry": { The valve mounts on Northern Tool Subplates 68306 (1/4in. This will prevent the flow of liquid through the valve. Compound valves incorporating the functions of a differential circuit, counter balance valve and a throttle valve, along with a decompression function, make it easy to construct a hydraulic press circuit.
"partNumber": "68305" The capability to switch the valve with a minute signal current (approximately 10 mA) enables direct drive from a programmable sequence controller. "externalIdentifier": { Indicating signal lights, manual override and electrical junction box are standard. "offerPrice": ", {"catalogEntry": { "description": [{ "offerPrice": ", {"catalogEntry": { *5.0HP/15kW model available for AKJ series. As a 2-position, 4-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder.
Daikin leverages its experience and technology to deliver air conditioning solutions that meet the demands of any setting. Explaination1 .For neutral unloaded directional control valve it must be ordered separately.There is no model (FWH-03)Electro-hydraulic directional control valve NS10. "uniqueID": "200737667", "longDescription": "This industrial-mobile Yuken Spool-Style 2 Hydraulic Directional Control Valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting.
;143",o="";for(var j=0,l=mi.length;j Realize high-pressure large-flow-rate control at 35 MPa and 100 L (G02) or 160 L/min (G03). "catalogEntryIdentifier": { "description": [{ }, } Indicating signal lights, manual override and electrical junction box are standard. "externalIdentifier": { }, {"catalogEntry": { As a single-solenoid valve, it will remain in its home position until shifted electrically, returning to home when the power is removed. These valves conform to NFPA D03/D05 and ISO 4401 mounting standards. The item you've selected was not added to your cart. It uses the electrical operated directional control valve to control the hydraulic operated directional control valve, and change the hydraulic oil direction. }, }], 14 MM, HEIGHT 40 MM, 26 WATT271-0511, C4801-V.12VDC-DIN43650 (VS151, VS152,VS81,VS82,VS241),CORE DIA. As a 3-position, 4-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder. "catalogEntryIdentifier": { "externalIdentifier": { } "fullImage": "/images/product/114x114/682/68297_114x114.jpg", }], "uniqueID": "200737669", The Flowfit collection of hydraulic directional control valves is truly extensive. port) and 203361 (3/4in. The valve body is made with high strength cast iron and internal passages designed to minimize pressure drop. Configurable for internal or external pilot/drains and options for pilot pressure reducing, pilot chocks, and main stage stroke adjustments. }], "uniqueID": "200737713",